| Model |
Semi Low Bed Trailer for Antenna Transportation |
| Dimension |
Length-11300+15 mm, Width-3400+ 5 mm, Height- 1350+25 mm |
| Chassis | Main girder formed of material ST 52, cross members at regular interval of material IS: 2062. Platform of 3 mm Aluminium chequered sheet on loading surface. 30 mm thick plate for mounting the antenna |
| Axles | 12 ton capacity axle of twin wheel version |
| Suspension | 12 tons capacity Pneumatic suspensions with height control valve |
| Tyre and wheel | 9.00 x 20 - 14 PR 4+1 Nos , 6.5 x 20 - 4+1 Nos |
| King pin | Dia. 50.8 mm |
| Landing leg | 2 speed landing gear set -1 No |
| Outrigger | 4 nos of foldable type outrigger support jacks (2-speed landing leg) at four corners of support jacks platform and one landing leg at the rear |
| Brake system | 2-line pneumatic brake system with air tank, relay emergency valve and brake chambers |
| Ladders | Detachable ladder at the front and side door (~1.4 m Height) to climb trailer bed |
| Painting | Spray painted with high quality paint as per customer choice |
| Level Indicators | 4 nos Spirit level indicators at each side at the Antenna mounting base plate as shown in the drawing |
| Jack base carrier with screw/studs | 04 nos for rising height of the jacks Antenna fitment base plate As per the customer requirement with suitable reinforcement |
| Antenna resting structure | Suitable structure for resting the dish while transportation |
| Accessories (Optional) | 1. Toolbox 2. Spare wheel carrier 3. SUPD, RUPD shall be provided as per CMVR requirements |
